news from atlantic
photo library


For immediate release:

Atlantic Technology Demonstrates its AT-2 H-PAS™ Technology Bookshelf Loudspeakers at the 2012 CEA Line Show

AT-2 AT-2
Atlantic Technology AT-2 H-PAS™ Bookshelf Loudspeakers,

NEW YORK (6/27/12) -- Atlantic Technology's new AT-2 compact bookshelf loudspeakers use the company's revolutionary H-PAS™ bass technology to deliver much higher levels of deep, low distortion bass than is possible with conventional speakers of the same size.  This is the same technology used in the company's AT-1 floor-standing speaker that has earned rave reviews from the audio press.

The new Atlantic Technology AT–2 is less than 16 inches tall and has an interior acoustic volume of less than 2/3-cubic foot, yet it delivers full, rich bass response down to 41 Hz at -3dB, which equates to exceptional bass performance for such a small speaker.

The Atlantic Technology AT-2 bookshelf loudspeaker uses a single 5-1/4-inch long-excursion woofer and the same 1-1/8-inch Low Resonance Tweeter (LRT™) used in the AT-1. It has a crossover frequency of 2,200 Hz, which is much lower than most conventional two-way speakers, affording much wider horizontal midrange dispersion.

"Atlantic Technology's H-PAS algorithm has worked beautifully as we scaled it down to the much smaller cabinet of the AT-2," said Atlantic Technology's president, Peter Tribeman. "These new bookshelf speakers are going to have lots of people looking futilely for a hidden subwoofer."

"H-PAS is a new speaker technology that is defined by a rather complex mathematical formula," continues Tribeman. "Since the early days of loudspeakers, audio engineers have used the mathematics of sound to design speakers with a vast array of different cabinet types. While H-PAS may seem to resemble other kinds of enclosures, it is quite different. The H-PAS formula that was devised by our engineers is unlike anything we’ve encountered before to define such known types as acoustic suspension, reflex, transmission line, and so on."

The AT-2’s H-PAS design allows it to reach down farther into the bass region than a listener would ordinarily expect. Atlantic Technology designed the AT-2 to deliver excellent, virtually full-range musical performance in small to medium-size rooms.

Atlantic Technology's designers also put as much energy and effort into the tweeter and midrange voicing as they did for the H-PAS portion of the speaker. The AT-2 uses an advanced 1-1/8-inch Low-Resonance Tweeter (LRT™) that affords a somewhat lower crossover frequency (2200 Hz) than is normal in a two-way system. This frequency is both low enough to afford very wide midrange dispersion and high enough to keep the tweeter out of thermal/mechanical danger. Additionally, the aluminum rear chamber functions as a highly effective heatsink to keep the tweeter cool, even though it is receiving a significantly higher drive current than a conventional tweeter would with a 3000-4000 Hz crossover.

The result is exceptionally wide dispersion through the midrange without the upper-midrange “beaming” normally exhibited by woofers in a two-way speaker. The tweeter’s oversized 4 mm textile surround -- which is rarely, if ever, found in a tweeter—allows for long excursion and very high power handling. As innovative as the H-PAS design is in the bass region, the AT-2’s tweeter is equally impressive in the higher ranges.

All the AT-2's crossover components are the very highest quality, and adhere to strict 1-percent value tolerances to ensure the best sound possible. The surprisingly heavy cabinet is heavily braced for rigidity and acoustic inertness. Engineers used advanced cabinet accelerometer measurements, coupled with exhaustive listening evaluation, to finalize the bracing design. The cabinet dimensions are 8-3/4 inches wide by 15 5/8 inches high 12-1/4 inches deep (222 x 396 x 310mm).

The metallic speckle gloss black paint process is quite similar to that used in the automotive industry. It is a multi-layer finish, with the “sparkles” being in the middle, under 2 or 3 layers of clear-coat finish. The designers tried for a subtle effect: one that looks like regular gloss black from a distance, but has the additional character and interest of the sparkle when viewed up close.  The bottom panel of the speaker has a standard ¼-inch threaded insert to secure it firmly onto better audiophile speaker stands that use a through-bolt in their bottom plate.

The Atlantic Technology AT-2 loudspeakers are currently available with a suggested retail price of $1800 per pair.

From its inception in 1989, Atlantic Technology's mission has been to produce home entertainment products that exemplify the very best in both performance and value. The company specializes in high-performance speaker systems for home theater and music, state-of-the-art electronics components, and products for custom audio/video installation. For more information on Atlantic Technology and its many fine products for music, home theater and custom aud

io/video installation, visit or call 781-762-6300.

#  #  # 

Atlantic Technology
343 Vanderbilt Avenue
Norwood, MA 02062

(781) 762-6300


Gordon Sell Public Relations
P.O. Box 439
Flemington, NJ 08822

(908) 788-0700





Press Contact:

Gordon Sell   

908 788-0700


Gordon Sell
Public Relations


Follow Atlantic Technology on Facebook